CARBURETORS & KITS

CARBURETORS & KITS

Items 1 to 10 of 21 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  1. CLEAR FLOAT BOWL PHBL H

    CLEAR FLOAT BOWL PHBL H

    CODE: M3014909

    Regular Price: £27.23

    Special Price: Excl. Tax: £18.34 Incl. Tax: £22.01

    CLEAR FLOAT BOWL PHBL H Learn More
  2. NGF OKO 30MM FLAT SLIDE RACING CARBURATOR

    NGF OKO 30MM FLAT SLIDE RACING CARBURATOR

    CODE: NGFOKO30

    Regular Price: £49.97

    Special Price: Excl. Tax: £27.66 Incl. Tax: £33.19

    NGF OKO 30MM FLAT SLIDE RACING CARBURATOR Learn More
  3. NGF OKO 32MM FLAT SLIDE RACING CARBURATOR

    NGF OKO 32MM FLAT SLIDE RACING CARBURATOR

    CODE: NGFOKO32

    Regular Price: £49.97

    Special Price: Excl. Tax: £27.66 Incl. Tax: £33.19

    NGF OKO 32MM FLAT SLIDE RACING CARBURATOR Learn More
  4. POLINI CARBURETOR CP 17.5MM WITH PULL CHOKE

    POLINI CARBURETOR CP 17.5MM WITH PULL CHOKE

    CODE: PO201.1700
    Excl. Tax: £45.80 Incl. Tax: £54.96

    POLINI CARBURETOR CP 23MM WITH CABLE CHOKE MECHANISM This was the Polini’s great idea, and this is the great result: an innovative carburetor, whose every single component has been designed, developed and manufactured by the company of Bergamo Available in a wide range of diameters - 15/17.5/19/21/23/24 - it is entirely made of aluminium, it has compact dimensions and it is 40% lighter than a traditional carburetor. The inlet pipe is very short and it features an exclusive concentric design and a geometry that optimizes the air flows when the gases pass through. The overflow of petrol in the atomizer has been designed to ensure correct flow dynamic at every position of the throttle valve when opens. The hole where the petrol enters and the larger needle allow the constant draft even in the most extreme conditions. The float level, completely made of plastic, and the needle seal are carefully controlled in the production department to ensure the same standard of efficiency over time. These features considerably simplify the setup of the carburetor. Thanks to the extremely sophisticated calibration, the petrol-air flows, main and low jets, have been designed to achieve the best performance with lower consumption. The compact size of the new carburetor is the result of a careful and meticulous management of the inner space and the maximum efficiency of all the components, subjected to strict controls. To ensure an easy and precise assembly on the best sellers engines and its compatibility to different filter boxes, both originals and racing, flanges with different diameters are available. A prestigious project like this has required a deep synergy of competences in this field. An extraordinary teamwork between the technical and the racing department to reach the goal which is visible to everybody: a technologically advanced product and of absolute reliability. A further confirmation by Polini which always makes the dreams of who is "racing" inside come true. Polini Jetting Specification for Various applications

    Learn More
  5. POLINI CARBURETOR CP 17.5MM WITH CABLE CHOKE MECHANISM

    POLINI CARBURETOR CP 17.5MM WITH CABLE CHOKE MECHANISM

    CODE: PO201.1701
    Excl. Tax: £45.80 Incl. Tax: £54.96

    POLINI CARBURETOR CP 17.5MM WITH CABLE CHOKE MECHANISM This was the Polini’s great idea, and this is the great result: an innovative carburetor, whose every single component has been designed, developed and manufactured by the company of Bergamo Available in a wide range of diameters - 15/17.5/19/21/23/24 - it is entirely made of aluminium, it has compact dimensions and it is 40% lighter than a traditional carburetor. The inlet pipe is very short and it features an exclusive concentric design and a geometry that optimizes the air flows when the gases pass through. The overflow of petrol in the atomizer has been designed to ensure correct flow dynamic at every position of the throttle valve when opens. The hole where the petrol enters and the larger needle allow the constant draft even in the most extreme conditions. The float level, completely made of plastic, and the needle seal are carefully controlled in the production department to ensure the same standard of efficiency over time. These features considerably simplify the setup of the carburetor. Thanks to the extremely sophisticated calibration, the petrol-air flows, main and low jets, have been designed to achieve the best performance with lower consumption. The compact size of the new carburetor is the result of a careful and meticulous management of the inner space and the maximum efficiency of all the components, subjected to strict controls. To ensure an easy and precise assembly on the best sellers engines and its compatibility to different filter boxes, both originals and racing, flanges with different diameters are available. A prestigious project like this has required a deep synergy of competences in this field. An extraordinary teamwork between the technical and the racing department to reach the goal which is visible to everybody: a technologically advanced product and of absolute reliability. A further confirmation by Polini which always makes the dreams of who is "racing" inside come true. Polini Jetting Specification for Various applications

    Learn More
  6. POLINI CARBURETOR CP 19MM WITH CABLE CHOKE MECHANISM

    POLINI CARBURETOR CP 19MM WITH CABLE CHOKE MECHANISM

    CODE: PO201.1901
    Excl. Tax: £46.43 Incl. Tax: £55.72

    POLINI CARBURETOR CP 23MM WITH CABLE CHOKE MECHANISM This was the Polini’s great idea, and this is the great result: an innovative carburetor, whose every single component has been designed, developed and manufactured by the company of Bergamo Available in a wide range of diameters - 15/17.5/19/21/23/24 - it is entirely made of aluminium, it has compact dimensions and it is 40% lighter than a traditional carburetor. The inlet pipe is very short and it features an exclusive concentric design and a geometry that optimizes the air flows when the gases pass through. The overflow of petrol in the atomizer has been designed to ensure correct flow dynamic at every position of the throttle valve when opens. The hole where the petrol enters and the larger needle allow the constant draft even in the most extreme conditions. The float level, completely made of plastic, and the needle seal are carefully controlled in the production department to ensure the same standard of efficiency over time. These features considerably simplify the setup of the carburetor. Thanks to the extremely sophisticated calibration, the petrol-air flows, main and low jets, have been designed to achieve the best performance with lower consumption. The compact size of the new carburetor is the result of a careful and meticulous management of the inner space and the maximum efficiency of all the components, subjected to strict controls. To ensure an easy and precise assembly on the best sellers engines and its compatibility to different filter boxes, both originals and racing, flanges with different diameters are available. A prestigious project like this has required a deep synergy of competences in this field. An extraordinary teamwork between the technical and the racing department to reach the goal which is visible to everybody: a technologically advanced product and of absolute reliability. A further confirmation by Polini which always makes the dreams of who is "racing" inside come true. Polini Jetting Specification for Various applications

    Learn More
  7. POLINI CARBURETOR CP 23MM WITH CABLE CHOKE MECHANISM

    POLINI CARBURETOR CP 23MM WITH CABLE CHOKE MECHANISM

    CODE: PO201.2301
    Excl. Tax: £47.71 Incl. Tax: £57.25

    POLINI CARBURETOR CP 23MM WITH CABLE CHOKE MECHANISM This was the Polini’s great idea, and this is the great result: an innovative carburetor, whose every single component has been designed, developed and manufactured by the company of Bergamo Available in a wide range of diameters - 15/17.5/19/21/23/24 - it is entirely made of aluminium, it has compact dimensions and it is 40% lighter than a traditional carburetor. The inlet pipe is very short and it features an exclusive concentric design and a geometry that optimizes the air flows when the gases pass through. The overflow of petrol in the atomizer has been designed to ensure correct flow dynamic at every position of the throttle valve when opens. The hole where the petrol enters and the larger needle allow the constant draft even in the most extreme conditions. The float level, completely made of plastic, and the needle seal are carefully controlled in the production department to ensure the same standard of efficiency over time. These features considerably simplify the setup of the carburetor. Thanks to the extremely sophisticated calibration, the petrol-air flows, main and low jets, have been designed to achieve the best performance with lower consumption. The compact size of the new carburetor is the result of a careful and meticulous management of the inner space and the maximum efficiency of all the components, subjected to strict controls. To ensure an easy and precise assembly on the best sellers engines and its compatibility to different filter boxes, both originals and racing, flanges with different diameters are available. A prestigious project like this has required a deep synergy of competences in this field. An extraordinary teamwork between the technical and the racing department to reach the goal which is visible to everybody: a technologically advanced product and of absolute reliability. A further confirmation by Polini which always makes the dreams of who is "racing" inside come true. Polini Jetting Specification for Various applications

    Learn More
  8. CARB KIT 21mm PHANTOM 100cc

    CARB KIT 21mm PHANTOM 100cc

    CODE: M1611035

    Regular Price: £81.54

    Special Price: Excl. Tax: £58.18 Incl. Tax: £69.82

    CARB KIT 21mm FOR PHANTOM 100cc Malossi fuel system These systems have been specially designed and calibrated for high-performancemotors, and are complete with all accessories needed for assembly (see generalcatalogue). MALOSSI is the leader in the design and production of specialfuel systems for motorcycles and scooters. MALOSSI systems are the result of intense research and precision drawingsand calculations. The suction pipes, reed valves, and air intakes designedby MALOSSI undergo efficiency tests and destructive tests to check theirperformance and reliability. Carburetors are customized for each vehicle according to the specific characteristicsof the motor and air intake, and are completely calibrated for dosage ofthe air-fuel mixture under all power delivery conditions. MALOSSI produces special components for fuel systems in order to supplya product that responds perfectly to the needs of the most demanding customer please note that due to the many variables e.g. exhausts, cylinder tuning etc available it is not possible for us to guarentee the exact jetting, the owness lies with the owner to ensure the jetting is sutible for there application if in doubt please take your machine to your local scooter shop or someone with knowledge and equipment to correctly set up your machine Learn More
  9. Dellorto 19mm PHBG Race Carb

    Dellorto 19mm PHBG Race Carb

    CODE: PO201.0161
    Excl. Tax: £58.72 Incl. Tax: £70.46

    19mm Racing carb with quick release top and easy access to main jet. RRP ú102.95 Learn More
  10. CARB KIT22mm PHVB FOR 125 ETC

    CARB KIT22mm PHVB FOR 125 ETC

    CODE: M1611026

    Regular Price: £85.51

    Special Price: Excl. Tax: £60.50 Incl. Tax: £72.60

    CARB KIT22mm PHVB FOR 125 ETC Malossi fuel system These systems have been specially designed and calibrated for high-performancemotors, and are complete with all accessories needed for assembly (see generalcatalogue). MALOSSI is the leader in the design and production of specialfuel systems for motorcycles and scooters. MALOSSI systems are the result of intense research and precision drawingsand calculations. The suction pipes, reed valves, and air intakes designedby MALOSSI undergo efficiency tests and destructive tests to check theirperformance and reliability. Carburetors are customized for each vehicle according to the specific characteristicsof the motor and air intake, and are completely calibrated for dosage ofthe air-fuel mixture under all power delivery conditions. MALOSSI produces special components for fuel systems in order to supplya product that responds perfectly to the needs of the most demanding customer please note that due to the many variables e.g. exhausts, cylinder tuning etc available it is not possible for us to guarentee the exact jetting, the owness lies with the owner to ensure the jetting is sutible for there application if in doubt please take your machine to your local scooter shop or someone with knowledge and equipment to correctly set up your machine Learn More

Items 1 to 10 of 21 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction